How to Tie the Carrick Bend and Lanyard Knot for a DIY Knot Board Display

Carrick Bend Featured

Continuing our DIY Knot Board Display, today Bryan showcases how to tie the Carrick Bend and how to add to it to make a decorative lanyard knot for things like zipper pulls.

Carrick Bend » Bends

(Strength: 4/Security: 3/Stability: 3/Difficulty: 4) See below for what these ratings mean.

The Carrick Bend is easy to untie and won’t slip under tension. However, the multiple curves that give this bend those properties also make it weaker than some others. As mentioned in the video, one of the checkpoints for this knot is to ensure that your working ends end up being tied in opposite directions.

The Carrick Bend also offers the perfect starting point for a lanyard, which is a great decorative knot for things like zipper pulls or anything that needs a pull.



Each knot will be assigned a rating from 1-5 (1 representing the lowest score) based on the following four properties:

Strength – All knots will weaken the strength of a rope, however, there are knots that are stronger than others. The scale here will reflect how strong the rope remains with the specified knot.

Security – The security scale refers to how well the knot will stay tied, and resist coming loose under a normal load.

Stability – Stability refers to how easily the knot will come untied under an abnormal load (i.e. the knot being pulled in a direction it was not intended to) A lower score here represents instability.

Difficulty – The lower the number, the easier a knot is to tie.

The post How to Tie the Carrick Bend and Lanyard Knot for a DIY Knot Board Display appeared first on ITS Tactical.

Original Article : HERE ; This post was curated & posted using : RealSpecific